Installation - PerkinElmer FL 6500 Installation Instructions Manual
Water jacketed 4-position multi-cell holder w/stirrer
Hide thumbs
Also See for FL 6500:
- Installation instructions manual (6 pages) ,
- Installation instructions manual (18 pages) ,
- Installation instructions manual (28 pages)
Advertisement
Two Male Connectors of Quick Coupling
•
Figure 3 Two Male connectors of quick coupling
I nstallation
1.
Prepare the FL 6500/8500 Fluorescence Spectrometer to install this accessory.
2.
Connect the instrument power cord and the communication cable.
3.
Loosen the accessory fixing bolt and remove the current sample accessory.
Figure 4 Loosening the accessory fixing bolt
4.
Pull out the cell holder by hand.
Figure 5 Pulling out the cell holder
5.
Remove the current front cover plate.
Figure 6 Front Cover Plate
3
09931525A
Advertisement
