Table of Contents
Advertisement
48 . DSC 4000 Installation and Hardware Guide
Configure the DSC 4000
The Pyris software must be configured for the DSC 4000. This must be done before the
DSC 4000 Application can be recognized.
1. Select Pyris Config from the Pyris group under PerkinElmer Applications in the
Programs menu accessed from the Start button or select Configure Analyzer from the
Pyris Manager Start button menu. The Pyris Configuration dialog box appears on the
screen.
2. Click the Add Analyzer button. The Add Analyzer dialog box appears.
3. From the list of available ports, select the port to which you connected the analyzer.
Remember that COM5 appears when an analyzer is connected to port 1 of an EdgePort
USB. Click the Add button. The DSC 4000's Configuration dialog box is displayed.
4. The system detects the type of analyzer that is attached and displays the default name
and other information for a DSC 4000 in this dialog box. Select the accessories that are
attached to the analyzer.
5. Click OK to accept the selections.
Advertisement
Table of Contents
