Installation - PerkinElmer FL 6500 Installation Instructions Manual

I nstallation
CAUTION Make sure the instrument is turned off while installing this accessory.
Assurez-vous que l'instrument est éteint lors de l'installation de cet accessoire.
ATTENTION
1. Prepare the FL 6500/8500 and Peltier Temperature Controller 201 in a location that is compatible
with the required environmental conditions for the operation.
2. Connect the power cord and communication cable of the instrument.
3. Loosen the knob to take apart the existing accessory.
Figure 20 Loosening the accessory fixing bolt
4. Pull out the cell holder by hand.
Figure 21 Pulling out the cell holder
5. Remove the front cover plate.
Figure 22 Front Cover Plate
12
09931519A