Installation - PerkinElmer Lambda 365 Installation Instructions Manual
Changer 8-cell for dissolution
Hide thumbs
Also See for Lambda 365:
- User manual (70 pages) ,
- Installation instructions manual (38 pages) ,
- Assembly/installation instructions (18 pages)
Advertisement
I nstallation
CAUTION
Make sure the instrument is turned off while installing this accessory.
ATTENTION
Assurez-vous que l'instrument est éteint lors de l'installation de cet
accessoire.
1. Prepare the Lambda 365 Spectrophotometer to install this accessory.
2. Connect the power cord and the communication cable. DO NOT turn on the power of the
instrument!
3. Remove the two round head screws with washer (M4*12L) to remove the existing cell holder and
base plate.
Figure 13. Location of the round head screws with washer
4. Pull out the cell holder and base plate by hand.
Figure 14. Pulling out the cell holder and base plate
6
09931465A
Advertisement
