Table of Contents
Advertisement
84 . DSC 4000 Installation and Hardware Guide
AS 6000 Autosampler Maintenance
The exterior surfaces of the AS 6000 may be cleaned with a soft cloth, dampened with a mild
detergent and water solution.
The bushings of the gripper fingers should also be kept clean. Use a cotton swab dampened
with a mild detergent and water solution to carefully wipe them clean. Use the same method
to clean the two sample trays.
Cleaning and Decontamination
Before using any cleaning or decontamination methods except those specified by
PerkinElmer, you should check with PerkinElmer that the proposed method will not damage
the equipment.
WARNING
AVERTISSEMENT
There are no user-serviceable parts inside the autosam pler.
Refer all servicing to a qualified P erkinElm er I nstrum ents
service engineer.
I l n'y a pas de pièces réparables par l'utilisateur à l'intérieur
de l'échantillonneur autom atique. Renvoyez tous les
services à un ingénieur de service qualifié P erkinElm er
I nstrum ents.
Advertisement
Table of Contents
