Table of Contents
Advertisement
28 . DSC 4000 Installation and Hardware Guide
Safety Precautions for the DSC 4000
WARNING
AVERTISSEMENT
The following precautions must be observed before and when using the DSC 4000
Differential Scanning Calorimeter:
Before connecting the DSC 4000 to the main outlet, check the main voltage setting and
•
fuse.
The DSC 4000 requires a good earth ground that is common to the earth ground of the
•
computer.
•
Check that the power cord supplied is appropriate for your country and is undamaged
before connecting it to the main voltage supply.
•
Use proper lifting posture when lifting the analyzer. The DSC 4000 with autosampler
weighs 19 kg. Lift the autosampler from underneath. Never attempt to lift the analyzer
by the autosampler (if installed) or by any cables attached.
When cleaning the instrument, consult PerkinElmer if there is any doubt about the
•
compatibility of decontamination or cleaning agents with parts of the equipment or with
material contained in it.
WARNING
AVERTISSEMENT
Be sure that all instrum ent operators read and understand
the follow ing precautions. I t is advisable to post a copy of
these precautions on or near the instrum ent itself.
Assurez-vous que tous les opérateurs d'instrum ents lisent
et com prennent les précautions suivantes. I l est conseillé
de publier une copie de ces précautions sur ou près de
l'instrum ent lui-m êm e.
Never touch the outer and inner furnace lids. The
tem perature of the furnace can reach as high as 445 °C. Use
tw eezers to rem ove the lids.
Ne touchez jam ais les couvercles ex térieurs et intérieurs du
four. La tem pérature du four peut atteindre 445 ° C. Utiliser
une pince à épiler pour enlever les couvercles.
Advertisement
Table of Contents
