Table of Contents
Advertisement
9. Save the play list by selecting Save Player from the File menu.
10. Start playback of the play list by clicking the Start at Top button or the Start at Current
Item button on the Player toolbar. These are the first two buttons on the toolbar:
NOTE: If you select the Start at Current Item button, the focused item must be a main-level
item, that is, Prepare Sample, Data Analysis, or Sample Group. However, if you are in
a Sample Group, you can start a play list from a Sample line in the Sample List.
NOTE: If you select Go To Load, Go To Temp, or Hold at Temp from the control panel while
a play list is running, the current sample run will end and the playback of the play list
ends.
This is just one example of using a play list with the AS 6000 autosampler. The AS 6000
autosampler on a DSC 4000 or DSC 6000 does not have the Tare/Weigh feature, so the
creation of a Sample Group is not automated. You will have to weigh the samples before
placing them in the sample pans and crimping the pans. You have to enter the weights into
the Sample Details area of the Edit Step: Sample section of the dialog box.
AS 6000 Autosampler . 79
Advertisement
Table of Contents
