Checking And Cleaning Of Spool Pipes, Rinse Pipes, Cold Water Jet And Draining Nozzles - Wexiodisk WD-90 DUO Installation And User Manual

Using the dishwasher
4.3.5 Checking and cleaning of spool pipes, rinse pipes, cold water jet and
draining nozzles
Spool pipes, rinsing pipes and nozzles are checked and cleaned as needed when
cleaning the dishwasher in general, see "Cleaning the inside of the machine" on
page 48.
4
2
1
The machine's washing compartment with wash arms and cold water jets
1. Rinse pipe, potwash
2. Rinse pipe, normal wash
3. Rinse pipes, final rinse
4. Standard machine: cold water jet
Machine with condensing unit: drain connection
5. Hood lifting cylinder
Check:
Spool pipes, rinse pipes and nozzles should be checked every day.
Check the following:
• The spool pipes, rinse pipes and jets are not dirty,
• There is no detritus clogging the wash nozzles on the spool pipes or jets
on the rinse pipes,
• The catches for the rinse pipes for normal wash (2) and potwash (1) are
properly engaged,
• The spool pipes, rinse pipes and jets are not damaged (if they are
damaged, contact the service company).
WD-90 DUO
1
52
Rev. 1 (201702)
4
3
1
5
3
3
2
25-4-04-001