Machine Faults And User Errors - Wexiodisk WD-90 DUO Installation And User Manual

Using the dishwasher

Machine faults and user errors

If a fault occurs on the machine, an alarm appears on the panel display. In the
table below, alarms are displayed in order of priority, in other words, if several
alarms are activated at the same time, the one that is highest in the list is dis-
played first.
Some alarm texts warn when something is wrong, whereas others just provide in-
formation. Some alarms only occur if the machine has certain additional options,
such as e.g. an extra HACCP alarm.
Panel for programme selection, start and stop, etc.
1. Display
2. Selection of normal wash programmes
3. Selection of potwash programmes
4. Granule collection
5. Activation of service mode
6. Page selection in service mode
7. Alarm reset
8. On / Off
9. Hood, up/down
Next to the panel button for alarm reset is a LED which illuminates red when an
alarm is activated. If the alarm can be reset with the reset button, the LED flashes.
If the activated alarm cannot be reset, the LED will be constantly lit.
Generally, if the actions proposed below do not solve the problem, or if the alarm
returns repeatedly in succession, you should contact the service company for
them to deal with the fault.
WD-90 DUO
58
Rev. 1 (201702)
1
2
3
4
5
6
7
8
9
25-4-00-003_1