Potwash Programs; Granule Collection Program; Cancelling A Wash Program And Stopping The Machine; Cancelling A Wash Programme - Wexiodisk WD-90 DUO Installation And User Manual

Using the dishwasher

4.2.4 Cancelling a wash program and stopping the machine

Potwash programs

For potwash, there are six different programs to choose from, three where gran-
ules are used for the wash (P1–P3) and three without granules (P4–P6). The se-
lected program is shown on the display (1) in the same way as for the normal
wash programs.
Perforated canteens, perforated containers and plastic containers should NOT be
washed with wash programmes where granules are used (P1 - P3). Use potwash
programmes P4 - P6 instead (potwash programmes without granules).
• Pressing the button for potwash programs (3) once, twice or three times se-
lects potwash programs P1–P3. For these three programs, cleaning of the
items to be washed is intensified by the addition of granules. Programs
(P1–P3) are best used for washing items which are very heavily soiled.
• Pressing the button (3) four, five or six times selects potwash programs
P4–P6, which are potwash programs without granules.
• Pressing the button (3) seven times selects program P0, which results in
the machine being set to standby mode for washing.
The potwash programs are differentiated not just by the use or otherwise of gran-
ules, but also the time the wash cycle takes, see "Technical data" on page 63.

Granule collection program

The granule collection program is used to collect the granules in the machine in
a special basket when the amount of granules is to be checked or the granules
cleaned. The procedure for collection of granules is described under "Checking
the amount and cleaning the granules" on page 53.
Pressing button (4) once activates the granule collection program. Pressing it
twice activates program 0 – standby mode.

Cancelling a wash programme

It is possible to cancel the start of a selected wash programmes as long as the
wash cycle has not yet started. This is achieved by opening the hood using the
button for hood operation. It is also possible to change a selected programme be-
fore the hood has managed to close ready to start the programme. This is
achieved by pressing the programme selection buttons.

Stopping the machine

If for any reason you need to stop the dishwasher while it is running, press the
button for switch-on/switch-off.
WD-90 DUO
41
Rev. 1 (201702)