Operation; Hot Water; Risk Of Crushing; Risk Of Slipping - Wexiodisk WD-90 DUO Installation And User Manual

Safety instructions

2.5 Operation

2.5.1 Hot water

STOP

2.5.2 Risk of crushing

STOP

2.5.3 Risk of slipping

STOP

2.5.4 Live parts

STOP
The temperature of the wash and rinse water is maintained during operation at
58°C and 85°C, respectively.
The machine is fitted with an anti-crushing system, which prevents serious injury.
If anything becomes trapped between the hood and the bottom section, the hood
reverses and moves up. The sensitivity of the anti-crushing system is adjustable
and can be set by a service engineer. Do not place hands or fingers in the
locations indicated in the diagram below when the hood is closing.
To prevent the risk of people slipping due to granules being spilled on the floor,
the latter should be regularly swept clean. Keep the floor dry. Mop up any water
which has been spilled.
Inside the cover plates on the bottom section of the machine are parts and com-
ponents that are live. The cover plates may therefore not be removed by anyone
other than a service engineer or a qualified electrician.
WD-90 DUO
8
Rev. 1 (201702)
25-4-00-017