4-32 DISASSEMBLY AND ASSEMBLY
CLUTCH
CLUTCH PLATE
REMOVAL
• Drain engine oil. (2-14)
• Remove the brake pedal. (4-71)
• Remove the clutch cover 1 and its gasket 2.
• Remove the clutch spring set bolts 3 and clutch springs.
NOTE:
Loosen the clutch spring set bolts 3 little by little and diagonally.
• Remove the clutch pressure plate 4, washer 5, bearing 6
and push piece 7.
• Remove the push rod 8.
NOTE:
If it is difficult to pull out the push rod 8, use a magnetic hand or
a wire.