Installation Procedure - Ricoh MPC 2800 AT-C2 Field Service Manual

2. Installation

Installation Procedure

• Unplug the main machine power cord before starting the following procedure.
If this finisher will be installed on the D023 or D025 copier, the following options must be installed before
2
installing this finisher.
- Bridge Unit (D386)
- Paper Feed Unit (D351) or LCT (D352)
1. Unpack the finisher, and then remove the stopper [A] and tapes ( x 1).
2. Install the front joint bracket [B], holder bracket [C] ( x 2 - M4 x 14), and rear joint bracket [D]
( x 2 - M4 x 14).
82