Ricoh MPC 2800 AT-C2 Field Service Manual page 670

8. Appendix: SP Mode Tables
Default Optional Counter
001
Type
External Optional Counter
002
Type
5114 [Optional Counter I/F]
001 MF Key Card Extension
5118 [Disable Copying]
8
001 This program disables copying.
[Mode Clear Opt. Counter
5120
Removal]
This program updates the information on the optional counter. When you install or remove
001
an optional counter, check the settings.
5121 [Counter Up Timing]
This program specifies when the counter goes up. The settings refer to "paper feed" and
001
"paper exit" respectively.
5126 [F Size Original Setting]
314
This program specifies the counter type.
0: None, 1: Key card (RK 3, 4)
2: Key card (down), 3: Prepaid card
*CTL
4: Coin rack, 5: MF key card
8: Key counter + Vendor
9: Bar-code Printer
This program specifies the external counter type.
0: None
*CTL 1: Expansion Device 1
2: Expansion Device 2
3: Expansion Device 3
[0: Not installed/ 1: Installed (scanning
*CTL
accounting)]
*CTL [0: Not disabled/ 1: Disabled]
[0: Yes (removed)/ 1: Standby (installed but not
*CTL
used)/ 2: No (not removed)]
*CTL [0: Feed/ 1: Exit]
[0 to 2 / 0 / 1 /step]
0: 8 1/2" x 13" (Foolscap)
*ENG
1: 8 1/4" x 13" (Folio)
2: 8" x 13" (F)