Ricoh MPC 2800 AT-C2 Field Service Manual page 634

8. Appendix: SP Mode Tables
018 Pattern Generation Number: Bk
019 Pattern Generation Number: M
020 Pattern Generation Number: C
021 Pattern Generation Number: Y
022 Pattern Generation Number: Upper limit
023 Toner Consumption Pattern Area
024 Supply Coefficient
025 Job End Area Coefficient
026 Job End Vb Coefficient
027 Job End Length
028 Job End Supply
[Blade damage prevention mode]
8
Adjusts the threshold temperature for preventing the cleaning blade at the drum unit from
3517
being damaged. If the temperature is above this value, the drum reverses briefly at the end
of the job to prevent the blade from flipping over.
001 Execution Temp. Threshold
3518 [Image Quality Adj. Execution Flag] DFU
001 Toner End Recovery: Bk
002 Toner End Recovery: M
003 Toner End Recovery: C
004 Toner End Recovery: Y
005 Vsg Adj.
006 Developer Mixing
278
*ENG
*ENG
*ENG [0 to 255 / 0 / 1 time/step]
*ENG
*ENG
[10 to 2550 / 300 / 10 cm
*ENG
step]
*ENG [0 to 2.55 / 1 / 0.01/step]
*ENG [0.1 to 25.5 / 1 / 0.1/step]
*ENG [0 to 100 / 40 / 1%/step]
*ENG [0 to 56 / 12 / 1mm/step]
[0 to 1 / 0.45 / 0.001 mg/cm
*ENG
step]
*ENG [0 to 50/ 40 / 1°C/step]
*ENG
*ENG
*ENG
[0 or 1 / 0 / 1/step]
0: OFF. 1: ON
*ENG
*ENG
*ENG
2
/
2
/