Ricoh MPC 2800 AT-C2 Field Service Manual page 736

8. Appendix: SP Mode Tables
Not used in this machine.
6148 [Jogger Fine Adj]
001 A3T
002 B4T
003 A4T
004 A4Y
005 B5Y
006 A5Y
007 DLT-T
008 LG-T
009 LT-T
010 LT-Y
011 HLT-Y
012 Other
8
[Max. Pre-Stack Sheet]
This SP sets the number of sheets sent to the pre-stack tray.
6149
Note:
You may need to adjust this setting or switch it off when feeding thick or slick paper.
001 -
[INPUT Check]
6150
Displays the signals received from sensors and switches of the bridge unit (D386) (* "Input
Check Table" in this section).
[OUTPUT Check]
6151
Displays the signals received from sensors and switches of the brisge unit (D386) (* "Output
Check Table" in this section).
380
*ENG Fine Adjust Output Jogger Unit Fences
This SP corrects the distance between the jogger fences and the
sides of the stack when the output jogger unit attached to the side
of the machine jogs sheets as they exit the finisher.
+ Value:
Increases distance between jogger fences and the sides of the
stack.
- Value:
Decreases the distance between the jogger fences and the sides
of the stack.
[-1.5 to 1.5 / 0 / 0.5 mm/step]
*ENG
[0 to 3 / 3 / 1 sheet/step]
Number of Pre-Stack Sheets