Ricoh MPC 2800 AT-C2 Field Service Manual page 720

8. Appendix: SP Mode Tables
On/Off (1:ON 0:OFF)
001
Switches the debug log feature on and off. The debug log cannot be captured until this
feature is switched on.
Target (2: HDD 3: SD)
Selects the storage device to save debug logs information when the conditions set with
002
SP5-858 are satisfied.
[ 2 to 3 / 2 / 1 /step]
Save to HDD
Saves the debug log of the input SC number in memory to the HDD.
005
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
Save to SD Card
006
Saves the debug log of the input SC number in memory to the SD card.
009 Copy HDD to SD Card (Latest 4 MB)
010 Copy HDD to SD Card (Latest 4 MB Any Key)
8
011 Erase HDD Debug Data
012 Erase SD Card Debug Data
013 Free Space on SD Card
014 Copy SD to SD (Latest 4 MB)
015 Copy SD to SD (Latest 4 MB Any Key)
016 Make HDD Debug
017 Make SD Debug
[Debug Save When]
These SPs select the content of the debugging information to be saved to the destination
5858
selected by SP5857-002.
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of SC error codes.
364
0: OFF, 1: ON
2: HDD, 3: SD Card
*CTL -