Ricoh MPC 2800 AT-C2 Field Service Manual page 674

8. Appendix: SP Mode Tables
5195 [Limitless SW DFU] DFU
001 -
5212 [Page Numbering]
This program adjusts the position of the second side page numbers.
A "– value" moves the page number positions to the left edge. A "+ value" moves the page
number positions to the right edge.
003 Duplex Printout Right/Left Position
004 Duplex Printout High/Low Position
[Set Time]
Adjusts the RTC (real time clock) time setting for the local time zone.
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.)
DOM: +540 (Tokyo)
5302
NA: -300 (New York)
EU: + 60 (Paris)
CH: +480 (Peking)
8
TW: +480 (Taipei)
AS: +480 (Hong Kong)
002 Time Difference
5307 [Summer Time]
Setting
001
Enables or disables the summer time mode.
• Make sure that both SP5-307-3 and -4 are correctly set. Otherwise, this SP is not
318
-
activated even if this SP is set to "1".
-
*CTL
[–10 to 10 / 0 / 1 mm/step]
[–10 to 10 / 0 / 1 mm/step]
*CTL# [-1440 to 1440 / Area / 1 min./step ]
[ 0 to 1 / NA, EU, ASIA / 1 /step]
0: Disabled
-
1: Enabled
NA and EUR: 1, ASIA: 0