Ricoh MPC 2800 AT-C2 Field Service Manual page 490

6. Appendix: Jam Detection
Jam Code SP Display
Finisher Staple Moving
7504 202 Motor: EUP (B804/
B805)
Finisher Staple Motor:
7504 203
EUP (B804/B805)
6
Finisher Folder Motor:
7504 204
EUP (B804 only)
7504 205 -
Finisher Punch Motor: EUP
7504 206
(B804/B805)
134
Description
Corner stapler HP sensor does not turn on/off
after the corner stapler movement motor has
turned on.
Stapler rotation HP sensor does not turn on/off
after the corner stapler rotation motor has
turned on.
Corner stapler does not finish stapling after a
specified time.
Booklet stapler does not finish stapling after a
specified time.
Fold plate HP sensor does not turn on/off after
the fold plate motor has turned on.
Clamp roller HP sensor does not turn on/off
after the clamp roller retraction motor has
turned on.
Fold bottom fence HP sensor does not turn on/
off after the fold unit bottom fence lift motor has
turned on.
Stack junction gate HP sensor does not turn on/
off after the stack junction gate motor has turned
on.
-
Punch encoder sensor does not turn on/off after
the punch drive motor has turned on.
Punch movement HP sensor does not turn on/
off after the punch movement motor has turned
on.
Paper position slide HP sensor does not turn
on/off after the paper position sensor slide
motor has turned on.
LCD
Display
R8-R12
R8-R12
R8-R12
-
R1-R4