Ricoh MPC 2800 AT-C2 Field Service Manual page 39

• Proxy Password (SP5816-066)
4. Get a Request Number
Execute the @Remote Settings
1. Enter the SP mode.
2. Input the Request number which you have obtained from @Remote Center GUI, and then enter [OK]
with SP5816-202.
3. Confirm the Request number, and then click [EXECUTE] with SP5816-203.
4. Check the confirmation result with SP5816-204.
Value
0 Succeeded
1 Request number error
3 Communication error (proxy enabled) Check the network condition.
4 Communication error (proxy disabled) Check the network condition.
Proxy error (Illegal user name or
5
password)
6 Communication error
8 Other error
Request number confirmation
9
executing
5. Make sure that the screen displays the Location Information with SP5816-205 only when it has been
input at the Center GUI.
6. Click [EXECUTE] to execute the registration with SP5816-206.
7. Check the registration result with SP5816-207.
Value
0 Succeeded
1 Request number error
2 Already registered
3 Communication error (proxy enabled) Check the network condition.
4 Communication error (proxy disabled) Check the network condition.
Meaning
Meaning
Solution/ Workaround
-
Check the request number again.
Check Proxy user name and password.
Check the network condition.
See "SP5816-208 Error Codes" below this.
Processing... Please wait.
Solution/ Workaround
-
Check the request number again.
Check the registration status.
Copier Installation
2
37