Ricoh MPC 2800 AT-C2 Field Service Manual page 583

[OHP: Trailing Edge Correction]
2624
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
paper trailing edge between the erase margin area and the image area.
001 Paper Transfer
002 Separation DC
2630 [OHP: Environment Correction]
001 Separation DC
002 Paper Transfer: BW
003 Paper Transfer: FC
[Thick 3: Bias]
2650
Adjusts the DC voltage of the discharge plate for thick paper 3.
001 Separation DC: 1st Page
002 Separation DC: 2nd Page
[Thick 3: Bias: BW]
2651
Adjusts the current for the paper transfer roller for thick paper 3 in black-and-white mode.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
[Thick 3: Bias: FC]
2652
Adjusts the current for the paper transfer roller for thick paper 3 in full color mode.
001 Paper Transfer: 1st Side
002 Paper Transfer: 2nd Side
[Thick 3: Paper Size Correction]
2653
Adjusts the size correction coefficient for the paper transfer roller current for each paper size.
SP2651 and SP2652 are multiplied by these SP values.
*ENG [–100 to 0 / 0 / 1 mm/step]
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG [1 to 60 / 22 / 1 /step]
*ENG [1 to 60 / 11 / 1 /step]
*ENG [1 to 60 / 1 / 1 /step]
*ENG
[0 to 4000 / 1000 / 10 –V/step]
*ENG
*ENG [0 to 250 / 10 / 1 –μA /step]
*ENG [0 to 250 / 12 / 1 –μA /step]
*ENG [0 to 250 / 11 / 1 –μA /step]
*ENG [0 to 250 / 15 / 1 –μA /step]
System Service Mode
8
227