Ricoh MPC 2800 AT-C2 Field Service Manual page 727

001 On Board NIC
002 On Board USB
5987 [Mech. Counter]
001 0: OFF / 1: ON
[SP print mode]
5990
Prints out the SMC sheets.
001 All (Data List)
002 SP (Mode Data List)
003 User Program
004 Logging Data
005 Diagnostic Report
006 Non-Default
007 NIB Summary
008 Capture Log
021 Copier User Program
022 Scanner SP
023 Scanner User Program
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board NIC" is limited only
for the NRS or LDAP/NT authentication.
• Other network applications than NRS or LDAP/NT
authentication are not available when this SP is set to "2". Even
though you can change the initial settings of those network
applications, the settings do not work.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
This SP detects that a mechanical counter device is removed. If
it is detected, SC610 occurs.
-
-
-
-
-
- -
-
-
-
-
-
System Service Mode
8
371