Ricoh MPC 2800 AT-C2 Field Service Manual page 781

L:FIN Jobs
These SPs total finishing methods for jobs output from within the document server mode
8 066
screen at the operation panel. The finishing method is specified from the print window
within document server mode.
O:FIN Jobs
8 067
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
8 06x 1 Sort
8 06x 2 Stack
8 06x 3 Staple
8 06x 4 Booklet
8 06x 5 Z-Fold
8 06x 6 Punch
8 06x 7 Other
T:Jobs/PGS
8 071
These SPs count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
C:Jobs/PGS
8 072
These SPs count and calculate the number of copy jobs by size based on the number
of pages in the job.
F:Jobs/PGS
8 073
These SPs count and calculate the number of fax jobs by size based on the number of
pages in the job.
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
Number of jobs started in Sort mode. When a stored copy job is set for
Sort and then stored on the document server, the L: counter increments.
(See SP8 066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in staple mode,
the Staple counter also increments.
Number of jobs started In any mode other than the Booklet mode and set
for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for a print job,
the P: counter increments. (See SP8 064 6.)
Reserved. Not used.
*CTL
*CTL
*CTL
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
System Service Mode
8
425