Ricoh MPC 2800 AT-C2 Field Service Manual page 816

8. Appendix: SP Mode Tables
SP9-XXX: Others
9511
001 M: Skew Motor
002 C: Skew Motor
003 Y: Skew Motor
9911 [Pressure Roller Condition]
Normal: Threshold: Upper
Limit
001
Specifies the threshold temperature of the pressure roller between M (middle) and H (high).
This SP is referred when the input voltage of the IH inverter is more than 93% (adjustable with
SP1-916-026).
Normal: Threshold: Lower
Limit
002
Specifies the threshold temperature of the pressure roller between L (low) and M (middle).
This SP is referred when the input voltage of the IH inverter is more than 93% (adjustable with
SP1-916-026).
8
Coefficient: Low
003
DFU
Adjusts the coefficient value of the temperature correction for ferrite roller rotation when the
the fusing unit is in the low temperature.
004 Coefficient: Mid.
005 Coefficient: High
460
Skew Origin Set *CTL
These SPs reset the skew correction value (SP2-119-001 to
-003) to "0".
*ENG [0 to 200 / 140 / 1 deg/step]
*ENG [0 to 200 / 120 / 1 deg/step]
[0 to 3 / 2 / 1 /step]
0: No effect
*ENG 1: Normal
2: High
3: Highest
*ENG [0 to 3 / 1 / 1 /step] DFU
*ENG [0 to 3 / 0 / 1 /step] DFU