2. Installation
4. Empty the toner collection bottle. Then attach securing tape to stop the toner bottle from coming out.
5. Do one of the following:
• Attach shipping tape to the covers and doors.
• Shrink-wrap the machine tightly.
2
• After you move the machine, make sure you do the "Auto Color Registration" as follows. This optimizes
color registration.
• 1. Do the "Forced Line Position Adj. Mode c" (SP2-111-3).
• 2. Then do the "Forced Line Position Adj. Mode a" (SP2-111-1).
To check if SP 2-111-1 was successful, watch the screen during the process. A message is displayed
at the end. Also, you can check the result with SP 2-194-10 to -12.
• Make sure that the side fences in the trays are correctly positioned to prevent color registration errors.
40