Ricoh MPC 2800 AT-C2 Field Service Manual page 571

001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: Plain: 1st Side
005 Separation DC: Plain: 1st Side
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2451 is multiplied by these SP values.
2471
• The paper leading edge area can be adjusted with SP2472.
007 Separation DC: Plain: 1st Side
[Thin: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2472
paper leading edge between the erase margin area and the image area.
Plain: 154 mm/sec, Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: Plain: 1st Side
005 Separation DC: Plain: 1st Page
007 Separation DC: Plain: 1st Side
[Thin: Trailing Edge Correction] Thin Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the paper trailing
edge in each mode. SP2453 and SP2457 are multiplied by these SP values.
2473
Plain: 154 mm/sec, Fine: 77 mm/sec
• The paper trailing edge area can be adjusted with SP2474.
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: Plain: 1st Side
005 Separation DC: Plain: 1st Side
007 Separation DC: Plain: 1st Page
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
System Service Mode
8
215