Ricoh MPC 2800 AT-C2 Field Service Manual page 597

003 Paper Transfer: Thick 1: 1st Side
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2851 is multiplied by these SP values.
005-00
8
• The paper leading edge area can be adjusted with SP2872.
005 Separation DC: Thick 1: 1st Side
006 Separation DC: Thick 1: 2nd Side
007 Separation DC: Thick 1: 1st Side
[Special 3: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2872
paper leading edge between the erase margin area and the image area.
Thick 1 and Thick 2&Fine: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
002 Paper Transfer: Plain: 2nd Side
003 Paper Transfer: Thick 1: 1st Side
005 Separation DC: Plain: 1st Side
006 Separation DC: Plain: 2nd Side
007 Separation DC: Fine: 1st Page
008 Separation DC: Thick 1: 1st Side
[Special 3: Trailing Edge Correction] Special 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2852 and SP2857 are multiplied by these SP values.
2873
Thick 1 and Thick 2&Fine: 77 mm/sec
• The paper trailing edge area can be adjusted with SP2874.
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
System Service Mode
8
241