Ricoh MPC 2800 AT-C2 Field Service Manual page 582

8. Appendix: SP Mode Tables
004 Paper Transfer: S4
005 Paper Transfer: S5
[OHP: Leading Edge Correction] OHP: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2603 and SP2608 are multiplied by these SP values.
2621
• The paper leading edge area can be adjusted with SP2622.
001 Paper Transfer
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2601 is multiplied by these SP values.
2621
• The paper leading edge area can be adjusted with SP2622.
002 Separation DC
8
[OHP: Switch Timing: Lead. Edge]
2622
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
paper leading edge between the erase margin area and the image area.
001 Paper Transfer
002 Separation DC
[OHP: Trailing Edge Correction] OHP: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2603 and SP2608 are multiplied by these SP values.
2623
• The paper trailing edge area can be adjusted with SP2624.
001 Paper Transfer
002 Separation DC
226
[100 to 600 / 260 / 5%/step]
*ENG
210 mm ≥ S4 size ≥ 148 mm (Paper width)
[100 to 600 / 330 / 5%/step]
*ENG
148 mm ≥ S5 size (Paper width)
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
[0 to 400 / 100 / 5%/step]