Ricoh MPC 2800 AT-C2 Field Service Manual page 708

8. Appendix: SP Mode Tables
Channel Max
Sets the maximum number of channels available for data transmission via the wireless LAN.
006
The number of channels available varies according to location. The default settings are set
for the maximum end of the range for each area. Adjust the upper 4 bits to set the maximum
number of channels. DFU
• Do not change the setting.
Channel Min
Sets the minimum number of channels available for data transmission via the wireless LAN.
007
The number of channels available varies according to location. The default settings are set
for the minimum end of the range for each area. Adjust the lower 4 bits to set the minimum
number of channels. DFU
• Do not change the setting.
8
008 Transmission Speed
352
[1 to 11 or 13 / 11 or 13 / 1 /step]
*CTL Europe/Asia: 1 to 13
NA/ Asia: 1 to 11
[1 to 11 or 13 / 1 / 1 /step]
*CTL Europe: 1 to 13
NA/ Asia: 1 to 11
[0 x 00 to 0 x FF / 0 x FF to Auto / -]
0 x FF to Auto [Default]
0 x 11 – 55M Fix
0 x 10 – 48M Fix
0 x 0F – 36M Fix
0 x 0E – 18M Fix
0 x 0D – 12M Fix
*CTL 0 x 0B – 9M Fix
0 x 0A – 6M Fix
0 x 07 – 11M Fix
0 x 05 – 5.5M Fix
0 x 08 – 1M Fix
0 x 13 – 0 x FE (reserved)
0 x 12 – 72M (reserved)
0 x 09 – 22M (reserved)