Ricoh MPC 2800 AT-C2 Field Service Manual page 702

8. Appendix: SP Mode Tables
147 Active IPv6 Stateless Address 1
149 Active IPv6 Stateless Address 2
151 Active IPv6 Stateless Address 3
153 Active IPv6 Stateless Address 4
155 Active IPv6 Stateless Address 5
156 IPv6 Manual Address
158 IPv6 Gateway Address
160 Action Mode (IPv6)
8
161 IPv6 Stateless Auto Setting
236 Web Item visible
237 Web shopping link visible
346
These SPs are the IPv6 status addresses (1 to 5)
referenced on the Ethernet or wireless LAN (802.11b)
in the format:
"Status Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured
in 8 blocks of 16 bits each.
This SP is the IPv6 manually set address referenced on
the Ethernet or wireless LAN (802.11b) in the format:
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured
in 8 blocks of 16 bits each.
This SP is the IPv6 gateway address referenced on the
Ethernet or wireless LAN (802.11b). The IPv6 address
consists of a total 128 bits configured in 8 blocks of 16
bits each.
Enables or disables the automatic setting for IPv6
stateless.
[0 or 1 / 1 / 1 /step]
0: Disable, 1: Enable
Displays or does not display the Web system items.
[0 x 0000 to 0 x ffff / 0 x ffff] 0: Not displayed, 1:
Displayed
bit0: Net RICOH
bit1: Consumable Supplier
bit2-15: Reserved (all)
Displays or does not display the link to Net RICOH on
the top page and link page of the web system.
[0 to 1 / 1 / 1]
0: Not display, 1:Display