Main Parts; Pick-Up Roller; Lower Separation Roller, Upper Separation Roller And Torque Limiter - Canon EF-9 Service Manual

CHAPTER 3
IV. MAIN PARTS
A. Pick-up Roller
1) Remove the pick-up motor following
steps 1 to 5 on Page 3-8.
2) Remove the drive unit.
3) Remove the 2 bushings and 2 gears,
and then take out the pick-up roller
shaft.
Bushings Gears

Pick-up roller

Figure 3-4-1
4) Remove the 2 E-rings and 2 bushings,
and then take out the pick-up roller
shaft.
3 - 6
B. Lower Separation Roller, Upper Sepa-
ration Roller and Torque Limiter
1) Remove the pick-up motor following
steps 1 to 5 on Page 3-8.
2) Remove the drive unit.
3) Remove the 2 E-rings and 2 bushings,
then take out the separation lower roller
shaft. Remove the lower separation
roller from the shaft.
E-rings Bushings
Lower separation roller
Figure 3-4-2