Motor; Removing The Stapler Shift Motor (M7); Removing The Assist Motor (M5) - Canon Inner Finisher-K1 Service Manual

Motor

Removing the Stapler Shift
Motor (M7)
■ Preparation
1. Remove the machine from the host machine.
"Removing this Machine" on page 44
2. Remove the Front Cover
Cover Unit" on page 51
3. Remove the Rear Cover."Removing the Rear Cover"
on page 51
4. Remove the Delivery
Tray" on page 51
5. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 55
6. Remove the Staple-free Staple
Staple-free Staple Unit" on page 60
7. Remove the Tray Guide
Guide Cover" on page 53
8. Remove the Processing Tray
Processing Tray Unit" on page 55
■ Procedure
1. Remove the Stapler Shift Motor [1].
• 2 Screws [2]
• 1 Connector [3]
2x
1x
Unit."Removing the Front
Tray."Removing the Delivery
Unit."Removing the
Unit."Removing the
Cover."Removing the Tray
Unit."Removing the
[3]
[2]
[2]
[1]
4. Parts Replacement and Cleaning
Removing the Assist Motor
(M5)
■ Procedure
1. Remove the machine from the host machine.
"Removing this Machine" on page 44
2. Remove the Front Cover
Cover Unit" on page 51
3. Remove the Rear
on page 51
4. Remove the Delivery
Tray" on page 51
5. Remove the Upper Feed Guide
Upper Feed Guide Unit" on page 55
6. Remove the Staple-free Staple
Staple-free Staple Unit" on page 60
7. Remove the Tray Guide
Guide Cover" on page 53
8. Remove the Processing Tray
Processing Tray Unit" on page 55
■ Preparation
1. Remove the Assist Motor Assembly [1].
• 1 Connector [2]
• 2 Screws [3]
• 1 Spring [4]
• 1 Belt [5]
1x
2x
62
Unit."Removing the Front
Cover."Removing the Rear Cover"
Tray."Removing the Delivery
Unit."Removing the
Unit."Removing the
Cover."Removing the Tray
Unit."Removing the
[3]
[1]
[5]
[4]
[3]
[2]