4
Parts Replacement and Cleaning Procedure > Removing the PCBs > Removing the Deck Driver PCB (PCB1)
Removing the PCBs
Removing the Deck Driver PCB (PCB1)
1) Remove the deck rear left cover.
(Refer to:4-18)
4) Remove three screws, release three PCB supports, and then remove the deck driver PCB.
4
Parts Replacement and Cleaning Procedure > Removing the PCBs > Removing the Deck Driver PCB (PCB1)
2) Remove two screws and then remove the PCB cover.
x2
F-4-106
x3
F-4-108
3) Remove all connectors from the deck driver PCB.
45
F-4-107
45