How To Use The Operation Panel (Application); Setting Up The Polygonal-Shape Stitching; Edit Method - JUKI DDL-9000C-S Instruction Manual

8. HOW TO USE THE OPERATION PANEL (APPLICATION)

8-1. Setting up the polygonal-shape stitching

A polygonal-shape stitching pattern consists of
20 steps (at the maximum) of constant-dimen-
sion sewing patterns. Specific sewing conditions
can be set on a step-by-step basis.

8-1-1. Edit method

① Displaying the polygonal-shape stitching pattern edit screen
<Sewing screen (Polygonal-shape stitching pattern)>
② Selecting the step to edit
Step that is being selected
<Polygonal-shape stitching pattern edit screen>
2. In the case there is an unused step(s), a step(s) can be added by following the procedure described
below. The step adding procedure is cancelled and the current screen is returned to the sewing
screen by pressing
dure. The tentative step is confirmed as an added step by setting the number of stitches and pitch.)
❺
❶
❽
❻ . (The step is displayed as a tentative step " " during the adding proce-
– 78 –
<Example of pattern>
Step 5
Step 1
Step 2
❺ held pressed for one sec-
Keep
ond on the sewing screen which appears
when the polygonal-shape stitching is se-
lected. Then, the polygonal-shape stitch-
ing pattern edit screen is displayed.
❷
1. Select a step by pressing
(The step that is being selected is dis-
played in reverse video.)
❻
Step 4
Step 3
❶ .