Table of Contents
Advertisement
9-2-2. Creating a new polygonal-shape stitching pattern
① Selecting the new-pattern creating function
Display the "new sewing pattern creation screen" referring to ① in
② Creating a polygonal shape stitching pattern
<New pattern creation screen>
③ Setting the pattern function on a step-by-step basis
<New sewing pattern edit screen>
9-2-3. Setting the step from which polygonal-shape stitching is started
In the case it is necessary to re-sew a pattern from the middle of the pattern after the occurrence of troubles
such as thread breakage, it is possible to re-start sewing from an arbitrary step of the pattern.
<Sewing screen (Polygonal-shape stitching pattern)>
❶
❸
❹ ❺
A
❷
❶
"9-1-1. Creation of a new pattern" p.
Display the "new sewing pattern creation screen"
referring to ② in
tern" p.
110.
Select polygonal-shape stitch pattern
on the stitch shape selection screen.
The "new sewing pattern edit screen" is dis-
played.
1) Set the pattern function with buttons ❷ on a
step-by-step basis.
Refer to
"6-2. Sewing patterns" p.
2) The total number of steps you have set is dis-
played on the right of section A. The current
step is displayed on the left of section A. The
current step can be changed with
3) Press
The "sewing pattern number registration
screen" is displayed.
Press
firmation screen.
Steps of procedure to be taken after the afore-
mentioned step are same as steps ③ to ④ in
"9-1-1. Creation of a new pattern" p.
The current step can be changed by pressing
❶ on the sewing screen for polygonal-shape
stitching pattern.
– 120 –
"9-1-1. Creation of a new pat-
❹ .
❺ to display the data discard con-
110.
❶
44.
❸ .
110.
Advertisement
Table of Contents
