How To Enter Card Information Manually; How To Select The Card Type - Magtek DynaPro Go Installation And Operation Manual

7 - Operation

7.6.4 How to Enter Card Information Manually

Upon failing all available methods for reading the cardholder's payment information, or upon transaction
timeout or a user-initiated Cancel operation, the host software and operator may opt to enter card data
manually, as shown in Figure 7-22.
During manual entry, the device expects the account number to be between 16 and 19 digits long, the
expiration date to be 4 digits long, and the card verification code (generally found on the rear of the card
for MasterCard and Visa, or the front of the card for American Express) to be 3-4 digits long.
Figure 7-22 - Example of User Screen to Manually Enter Card Data

7.6.5 How to Select the Card Type

In a retail setting, the transaction might require the cardholder to select the card type (for example, Credit
or Debit). For example, Figure 7-23 shows the device is prompting the cardholder to press a function key
on the keypad to select or .
Credit Debit
Figure 7-23 - Example of User Screen to Select Card Type
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 69 of 77 (D998200129-20)