Operation; Operation Overview - Magtek DynaPro Go Installation And Operation Manual

7 - Operation

7 Operation
7.1

Operation Overview

When DynaPro Go is ready to begin a new transaction, it shows
Figure 7-1 - Examples of Welcome Screen (Ready for a New Transaction)
During normal operation, the operator initiates a transaction from the host, and the cardholder enters data
on the device's keypad in response to prompts on the LCD display. Transaction types may include new
accounts, teller window applications, checking, savings, mortgages, retail transactions, or any other type
of transaction where there is interaction between the cardholder and the operator. For each transaction
type, the host software can direct the device to prompt the cardholder for any combination of magnetic
stripe swipe, EMV contact card insertion, and/or contactless payment tap, and the transaction flow on the
device may differ depending on what the host software specifies and what the cardholder does. Section
7.6 Card Reading provides examples of the cardholder experience for each type of payment. Figure 7-2
shows a typical point of sale (POS) transaction sequence.
If the device can not read payment data, it may request the cardholder repeat the action, or request the
cardholder revert to a different form of payment (such as using the magnetic stripe reader instead of the
chip card slot). The device may also prompt the cardholder to identify the card type, such as debit or
credit. If the transaction requires a PIN (such as in banking or debit card transactions), the device
prompts the cardholder to enter one. In the case of an EMV transaction with a successful chip read, the
device uses the transaction amount and the chip card's on-chip risk management to decide whether to
process the transaction offline or require online approval.
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 47 of 77 (D998200129-20)
on the LCD display.
Welcome