Magtek DynaPro Go Installation And Operation Manual page 38

6 - Configuration
10) In the
Device Name
press the Open Device
11) Use the right and left arrow buttons in the tab bar to scroll the tab bar, then select the
12) In the
Wireless Host Configuration
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
list, select the serial number or name of the device you want to connect to, then
button.
group, press the
Page 38 of 77 (D998200129-20)
Enable Wireless Configure
tab.
Wireless
button.