How To Change The Active Connection - Magtek DynaPro Go Installation And Operation Manual

6 - Configuration
6.3

How to Change the Active Connection

DynaPro Go supports multiple connection types, but only one interface can be active at a time. Initial
configuration requires the host to use the USB port, but after configuration, generally a live deployed
solution will not require changing the Active Connection.
To change the active connection, on the screen, press
Welcome Left Function Key 4 5 6 Right
to show a confirmation screen to begin using the currently inactive connection type.
Function Key
To change the active connection and return to the screen, press the key or the function
Welcome Enter
key below Yes . To exit without changing the active connection, press Cancel key or the function key
below , or wait 10 seconds for the device to return to the screen.
No Welcome
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
Page 33 of 77 (D998200129-20)