Magtek DynaPro Go Installation And Operation Manual page 45

6 - Configuration
5) Launch
PCIPED_HASim.exe
6) Under Device Connection method
5) In the
Device Name or IP Port for Connection
TLS12://aaa.bbb.ccc.ddd:Port/TLSxxxx
Port is the server port of the device (default is port 26), and TLSxxxx is the device name.
6) Press the
Open Device
7) If the connection is successful, the device shows
information, and setup is complete. If the connection is not successful, the tool will show an error.
Some failures may also show error codes on the device display.
7) To continue testing, you may use the various tabs in the
window to send commands to the device through the wireless connection or to receive transaction
data.
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
.
, select TLS1.2
, where aaa.bbb.ccc.ddd is the IP address of the device,
button.
Page 45 of 77 (D998200129-20)
(if TLS is Disabled, select
field, enter
Welcome on the display, the tool shows the device
MagTek PCI PED Host App Simulator
TCP/IP instead).