Magtek DynaPro Go Installation And Operation Manual page 42

6 - Configuration
26) The device is now configured for hosts to connect to it using the wireless access point.
27) To enable or disable TLS, set the
On changing, the device will show the new TLS mode on the display.
28) To perform basic connection testing, leave the
open and follow the steps in section 6.4.5 How to Test the 802.11 Wireless Connection.
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Installation and Operation Manual
checkbox to Enabled (checked) or Disabled (unchecked).
TLS 1.2
MagTek PCI PED Host App Simulator
Page 42 of 77 (D998200129-20)
window