Tim 4R-Ie Dnp3 / Tim 3V-Ie Dnp3 - Siemens SIMATIC TeleControl DNP3 Configuration Manual

You will find details of how the send buffer works (storing and sending events) as well as the
options for transferring data in the section Process image, type of transmission, event
classes (Page 113).
For information on saving events on an optional SD card, see section Basic settings
(Page 33).
Messages: E-mail
Up to 10 messages which the TIM can send as e-mails can be configured in STEP 7.
● Number of characters per e-mail
Maximum number of characters that can be transferred per e-mail: 256 ASCII characters
including any value sent at the same time
1.5.2

TIM 4R-IE DNP3 / TIM 3V-IE DNP3

Number of DNP3 connections
You will find the connection resources in the form of the table after the following listing.
TIM configured as DNP3 master station / node station
● TIM 4R-IE DNP3
Number in total: Max. 128,
of which:
– Pro Ethernet interface:
– Pro RS-232 interface:
● TIM 3V-IE DNP3
Number in total: Max. 8,
of which:
– Via the Ethernet interface: Max. 8
– Via the RS-232 interface: Max. 8
TIM configured as DNP3 station
● TIM 4R-IE DNP3
Number in total: Max. 32,
of which:
– Per Ethernet interface Max. 16
– Per RS-232 interface: Max. 16
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
- Configured with master station function: Max. 64
- Configured with station function: Max. 16
- Configured with master station function: Max. 32
- Configured with station function: Max. 16
Functions and requirements
1.5 Performance data and configuration limits
17