Notifications; C.7.2 Notifications - Siemens SIMATIC TeleControl DNP3 Configuration Manual

Below you will find several examples of events that are entered in the diagnostics buffer:
● TIM startup
● Change to the configuration
● Establishment/abort of the communications connection
● Time-of-day synchronization
● Power failure
C.7.2

Notifications

Messages
Table
The table lists the last messages of the TIM with the following information:
● Number
Consecutive number
● Time
Time of sending
● Trigger
Trigger that fired generation of the message.
● Recipient
Configured recipient of the message
● Message
Message text
● Processing status
Status of the sending of the message
You will find an overview of the possible statuses in the section Processing status of the
messages (e-mail) (Page 153).
● Type
Type of the message
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
WBM of the TIM 1531 IRC
C.7 Diagnostics
177