Siemens SIMATIC TeleControl DNP3 Configuration Manual page 154

Diagnostics
4.6 Processing status of the messages (e-mail)
Processing status of the telecontrol e-mails
The meaning of the statuses is as follows:
Table 4- 2
Status
0000
0001
Table 4- 3
Status
0000
82xx
8401
8403
8405
8406
8407
8408
8409
8410
8411
8412
8413
8414
8415
8416
8417
8418
8419
8420
8421
8450
154
SMS: Meaning of the status ID output in hexadecimal format
Meaning
Transfer completed free of errors
Error in the transfer, possible causes:
SIM card invalid
•
No network
•
Wrong destination phone number (number not reachable)
•
E-mail: Meaning of the status ID output in hexadecimal format
Meaning
Transfer completed free of errors
Other error message from the e-mail server
Apart from the leading "8", the message corresponds to the three-digit error number of the
SMTP protocol.
No channel available. Possible cause: There is already an e-mail connection via the mod-
ule. A second connection cannot be set up at the same time.
No TCP/IP connection could be established to the SMTP server.
The SMTP server has denied the login request.
An internal SSL error or a problem with the structure of the certificate was detected by the
SMTP client.
Request to use SSL was denied.
The client could not obtain a socket for creating a TCP/IP connection to the mail server.
It is not possible to write via the connection. Possible cause: The communications partner
reset the connection or the connection aborted.
It is not possible to read via the connection. Possible cause: The communications partner
terminated the connection or the connection was aborted.
Sending the e-mail failed. Cause: There was not enough memory space for sending.
The configured DNS server could not resolve specified domain name.
Due to an internal error in the DNS subsystem, the domain name could not be resolved.
An empty character string was specified as the domain name.
An internal error occurred in the cURL module. Execution was aborted.
An internal error occurred in the SMTP module. Execution was aborted.
Requests to SMTP on a channel already being used or invalid channel ID. Execution was
aborted.
Sending the e-mail was aborted. Possible cause: Execution time exceeded.
The channel was interrupted and cannot be used before the connection is terminated.
Certificate chain from the server could not be verified with the root certificate of the module.
Internal error occurred. Execution was stopped.
Action not executed: Mailbox not available / unreachable. Try again later.
Configuration Manual, 11/2018, C79000-G8976-C508-01
Configuration - DNP3