Siemens SIMATIC TeleControl DNP3 Configuration Manual page 146

Diagnostics
4.5 SINAUT special diagnostics
right. The known subscribers are listed with their subscriber number and subscriber type,
if accessed over a STEP 7 project the name and station is also displayed.
● Status tab:
Information on the reachability of the partners, connections or connection disruptions and
information on data communication and the operation of the send buffer
● Partner tab:
Displays the known partners:
– With CPU modules: Display in the known partners tab of the CPU selected in the list
● Dialing list external tab (optional):
Dial-up service and command of the connected TIM module
● Polling list tab (optional):
Data of the station call of the partners of the connected TIM module connected over a
dedicated line with the option of disabling or enabling a connected partner
The colored symbols in the selection list of known subscribers indicate the reachability of the
individual subscribers and have the following meaning:
Table 4- 1
146
of known subscribers on the left of the dialog
Symbols indicating subscriber reachability in subscriber diagnostics
Symbol Status
Subscriber is reachable, all connections are OK
Subscriber is reachable, at least one connection is disrupted
Subscriber is not reachable
Configuration Manual, 11/2018, C79000-G8976-C508-01
Configuration - DNP3