Usable Cpus; Software Requirements - Siemens SIMATIC TeleControl DNP3 Configuration Manual

1.3

Usable CPUs

Compatible CPUs
The following can be configured as assigned CPUs of the communications modules:
● TIM 1531 IRC
– S7-1500
– S7-300
– S7-400
● CP 1243-1 / CP 1243-8 IRC
CPU with firmware version as of V4.2
● CP 1542SP-1 IRC
CPUs as of firmware version V2.0:
– CPU 1510SP-1 PN
– CPU 1510SP F-1 PN
– CPU 1512SP-1 PN
– CPU 1512SP F-1 PN
You will find more detailed information on the CPUs and the BusAdapters in the manual
/5/ (Page 188).
1.4

Software requirements

Software for configuration and online functions
To configure the modules, the following configuration tool is required:
● STEP 7 Professional V15.1
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
All CPUs as of firmware version V2.1
All CPUs with PROFINET interface
All CPUs with PROFINET interface
Functions and requirements
1.3 Usable CPUs
15