Siemens SIMATIC TeleControl DNP3 Configuration Manual page 170

WBM of the TIM 1531 IRC
C.4 Start page
Start page
Figure C-1
The page shows general data of the module.
General
● Station name
Parameter configured in STEP 7
● Module name
Parameter configured in STEP 7
● Module type
● Article number
Status
● Operating status
Current operating status of the TIM
● Status
Status of the firmware startup of the TIM:
– TIM started up free of errors
– Startup aborted with error
● Firmware date
Date the firmware currently being used was generted
Format: MMM DD YYYY, hh:mm:ss
170
Start page of the WBM
Configuration Manual, 11/2018, C79000-G8976-C508-01
Configuration - DNP3