Siemens SIMATIC TeleControl DNP3 Configuration Manual page 181

The following information is available on each subscriber:
● Information on the subscriber
● Information on the transmission path
Information on the subscriber
Local CPU
● Status
Operating status of the local CPU
● Number of connections
Number of connections between the TIM and local CPU
Remote partner
● Partner type
– Application (e.g. WinCC)
– CPU
– TIM
– CP ...
● Subscriber number
Subscriber number of the partner
● Time master
Display of the option configured on the partner:
Yes / No
● Security options
Display of the active access level (protection):
ON / OFF
● Connection status
– Connected
– Not connected
For the meaning of the colors, see above (Connection overview).
● Frame memory status
State of the send buffer, only relevant for a communications module:
– Normal operation
Configuration - DNP3
Configuration Manual, 11/2018, C79000-G8976-C508-01
CPU of the remote station
The send buffer is working normally. The memory space allocation is between 10 and
80 %.
WBM of the TIM 1531 IRC
C.9 Telecontrol
181