Tim Subscriber Diagnostics - Partner Tab - Siemens SIMATIC TeleControl DNP3 Configuration Manual

Diagnostics
4.5 SINAUT special diagnostics
4.5.3.3

TIM Subscriber Diagnostics - Partner tab

Partner tab
The Partner tab displays the following known partners with their subscriber number, name
and station in the List of communication partners box:
● With CPU modules: Display of the communication partners of the CPU selected in the list
on the left of the dialog
● With TIM modules: Display of the communication partners of the connected TIM module
selected in the subscriber list prior to opening the dialog.
If different subscribers are selected on the left in the dialog, the same subscribers are
always displayed in the list of communication partners.
With TIM modules, partners are only displayed if the TIM is installed in the master station
and is connected to partners over a dedicated line.
Figure 4-3
148
TIM subscriber diagnostics dialog, Partner tab
Configuration Manual, 11/2018, C79000-G8976-C508-01
Configuration - DNP3