Graco PrecisionSwirl Instructions-Parts List Manual page 72

Errors
Event Gateway
Code Error No. Event Name
EBUX --- Download to
USB Complete
WSU0 --- USB configura-
tion error
WNC0 32 ADM Key Token
Error
WNG0 --- Gateway Map
Error
CBG0 --- Gateway Reset
WMG0 --- Gateway Error
Detected
CBD_ --- Fluid Plate Com-
munication Error
CCG_ --- Fieldbus Com-
munication Error
Fluid Plate Events and Errors
Event Gateway
Code Error No. Event Name
CAC_ --- CGM Communi-
cation Error
CAD_ --- Fluid Plate Com-
munication Error
B7C_ 30 Style Out of
Range
72
Event
Description Event Type
Control Center Events and Errors
Download to the USB is Advisory
complete (self-clearing)
USB configuration error Advisory
Missing or invalid key Alarm
token
Missing or invalid map Advisory
Gateway reset Advisory
(self-clearing)
Gateway error Alarm
detected; includes any
error not covered by
another more specific
error
Fluid Plate Communi- Alarm
cation Error with ADM
Fieldbus Communica- Alarm
tion Error
Event
Description Event Type
Fluid Plate Events and Errors
Communication lost Advisory
between CGM and
Fluid Plate
FCM lost communica- Alarm
tion with the ADM
Style is out of range Alarm
Cause
--- No action necessary
USB configuration Reinstall system soft-
invalid or not present ware on display
An ADM key token is Verify the key token is
required to run the installed
system
Verify the key token
part number is correct
for the PCF ADM
Missing or invalid Install PCF map in
Gateway map Gateway
Gateway setting(s) Wait for reset to com-
changed plete before attempt-
ing automation control
--- ---
The ADM lost commu- Restore communica-
nications with the tion.
FCM.
The automation gate- Restore communica-
way lost communica- tions.
tion with the
automation controller.
Cause
Fluid Plate and CGM Reconnect or replace
are no longer commu- CAN cable
nicating
CGM is not functioning Replace the CGM if the
red status LED is solid
ADM is not communi- Reconnect or replace
cating CAN cable
ADM is not functioning Replace FCM if red
status LED is solid
ADM does not contain Verify intended ADM
appropriate key token key token is properly
inserted
Style requested by Use a style number
automation controller that is in range
exceeds number of
Increase number of
styles available on the
styles in PCF; pur-
fluid plate
chase accessory key
token
Solution
Solution
3A2098S